Jacksonville, Florida

Commercial Concrete Contractors
in Jacksonville, FL

DBPR-licensed commercial concrete contractors serving Duval County. Warehouse floors, loading docks, parking lots, ADA approaches & tilt-up construction — built to Florida Building Code. Free written estimate before any work begins.

Florida DBPR Licensed Fully Insured ACI Standards Free Written Estimate Duval County Permits
25+ Years Experience
1,200+ Projects Done
$0 Hidden Fees
5.0★ Google Rating
Florida DBPR Licensed General Liability Insured Workers Comp Coverage ACI Installation Standards Florida Building Code Compliant Duval County Permit Ready Written Warranty Included OSHA Safety Compliant
Our Services

Commercial Concrete Services Across Duval County

From forklift-rated warehouse slabs to ADA-compliant exterior approaches, our licensed crews handle every aspect of commercial concrete work across Jacksonville and Northeast Florida.

01

Warehouse & Industrial Floors

Forklift-rated industrial slabs and warehouse floors built to load specifications. Vapor barrier, rebar reinforcement, and control joint layout designed for heavy equipment traffic and long-term flatness tolerance.

IndustrialFlatworkForklift-Rated
Get Estimate →
02

Parking Lots & Lots

Commercial parking lot concrete installation, expansion joint layout, and ADA-compliant slope design across Duval County. Drainage planning is factored into every pour from design stage to avoid ponding and surface deterioration.

ParkingADA SlopesDrainage
Get Estimate →
03

Loading Dock Surfaces

Heavy-duty loading dock aprons and approach slabs built for repeated truck and pallet jack impact. Six-inch minimum slab depth standard for commercial loading applications with rebar on 12-inch centers.

Loading DockHeavy DutyApproach Slabs
Get Estimate →
04

Concrete Sidewalks & Walkways

ADA-compliant commercial sidewalks, accessible pedestrian routes, and exterior walkways across Jacksonville commercial properties. Code-compliant cross-slopes, detectable warning surfaces, and permit coordination included.

ADA CompliantSidewalksWalkways
Get Estimate →
05

Tilt-Up & Foundation Work

Tilt-up concrete panel foundations, grade beams, and structural slabs for commercial construction in Duval County. Engineering coordination available. All pours comply with current Florida Building Code structural requirements.

Tilt-UpFoundationGrade Beams
Get Estimate →
06

Commercial Concrete Repair

Structural crack repair, joint resealing, spall patching, and slab leveling for commercial properties. Epoxy injection and polyurea joint sealing for high-traffic surfaces. Subbase assessment before any repair recommendation.

Crack RepairJoint SealingLeveling
Get Estimate →

Not sure what your project needs? We'll assess it on-site — free.

Get Free On-Site Estimate →
Why Choose Us

Why Jacksonville Businesses Choose Our Concrete Crew

Commercial concrete in Jacksonville isn't the same as pouring residential flatwork. The load requirements are different, the permitting process is different, and Jacksonville's sandy subgrade and high water table create site conditions that out-of-area contractors consistently underestimate. Here's why local businesses keep calling us back.

  • 🏛️

    Florida DBPR Licensed & Insured

    Every contractor on our crews holds a valid Florida DBPR license. General liability and workers compensation certificates provided before any project begins. Verify us directly through the state portal — we encourage it.

  • 📐

    ACI Standards on Every Pour

    All commercial concrete work follows American Concrete Institute (ACI) installation standards and current Florida Building Code requirements. No shortcuts on reinforcement, curing, or joint layout.

  • 📋

    Written Quote Before Anything Moves

    Itemized written estimate submitted before scheduling. Scope changes require written approval. No surprise line items when the invoice arrives.

  • 📍

    Duval County Local Knowledge

    Sandy subgrade, water table variability, subtropical heat — we've been managing these Jacksonville-specific conditions on commercial sites for over a decade. That knowledge is built into every project plan.

  • 📝

    Permit Coordination Included

    We manage Duval County and City of Jacksonville permit requirements as part of the project — you shouldn't have to navigate commercial building permits yourself.

DBPR Licensed ACI Standards Florida Building Code OSHA Compliant Duval County Permits
Licensed commercial concrete contractor Jacksonville FL — crew installing reinforced slab, Duval County
25+ Years of Local Commercial Experience
Commercial concrete problem assessment — Jacksonville FL contractor evaluating slab damage
Problems We Solve

Commercial Concrete Problems We Solve in Jacksonville

Most commercial concrete issues in Jacksonville share a root cause: subbase failure, improper drainage design, or pours that didn't account for Duval County's soil conditions. Here's what we see most often — and how we address it.

  • ⚠️

    Slab Settling & Void Formation

    Sandy subgrade washout under commercial slabs creates voids that cause progressive settling and structural cracking. Polyurethane foam injection can stabilize the subbase without full slab removal.

  • ⚠️

    Expansion Joint Failure

    Failed or missing expansion joints in commercial floors and parking lots allow moisture intrusion and edge spalling. Polyurea joint sealing stops further deterioration and extends slab life significantly.

  • ⚠️

    Parking Lot Drainage Problems

    Inadequate cross-slope design causes ponding on commercial parking lots — accelerating surface spalling and creating liability exposure for businesses. Resurfacing with corrected slopes resolves this without full replacement.

  • ⚠️

    ADA Non-Compliance

    Heaved or settled concrete walkways and curb cuts can create ADA compliance violations. We assess, document, and correct slope issues on commercial pedestrian surfaces across Jacksonville.

  • ⚠️

    High Water Table Moisture Intrusion

    Without a proper vapor barrier, Jacksonville's water table pressure pushes moisture through commercial slabs — damaging flooring, causing efflorescence, and creating mold risk in enclosed spaces.

Schedule a Site Assessment →
Our Process

Our Turnkey Commercial Concrete Process

Every commercial concrete project in Jacksonville follows the same structured process — from the first site visit to the final inspection. No surprises, no scope creep without your approval.

01
🔍

Site Assessment

We inspect the site before quoting anything. Subbase condition, drainage, soil type, existing concrete, and load requirements all affect the specification. Nothing is assumed.

02
📋

Written Estimate

Itemized written estimate submitted for your review and approval. No verbal commitments. Scope changes require written sign-off before any work is modified.

03
📁

Permits & Planning

We coordinate all required City of Jacksonville and Duval County permits. Engineering coordination available for structural and tilt-up commercial work.

04
🔩

Site Preparation

Subgrade compaction, gravel base installation, forming, rebar or wire mesh placement. Site prep is completed fully before the concrete truck arrives — no shortcuts.

05
🏗️

The Pour & Finish

Concrete ordered to project specification — typically 4,000 PSI for commercial flatwork. Control joints placed to manage crack patterns. Finishing to specified texture or surface treatment.

06

Curing & Final Inspection

Curing managed for Jacksonville's climate conditions. Final walkthrough with the client before sign-off. Warranty terms confirmed in writing. Project not closed until you're satisfied.

📝

Written Warranty on Every Project

Verbal warranties are not enforceable in Florida. All warranty coverage terms are documented in writing before work begins — what's covered, for how long, and what triggers the warranty.

🤝

No Deposit Until You've Approved the Quote

A responsible contractor doesn't ask for money before you've reviewed and signed the written estimate. Project start date and timeline confirmed in writing before any funds change hands.

Pricing Guide

How Much Does Commercial Concrete Cost in Jacksonville, FL?

Commercial concrete pricing in Jacksonville varies significantly by project type, slab specification, and site conditions. These are market ranges based on typical Duval County commercial projects — always get a written, itemized estimate before committing.

Standard Concrete Flatwork

$7–$14 per sq ft

Warehouse / Industrial Slab

$9–$18 per sq ft

Parking Lot Replacement

$5–$11 per sq ft
Commercial Concrete Service Jacksonville Price Range
Commercial parking lot — new install$5 – $11 / sq ft
Warehouse / industrial floor slab$9 – $18 / sq ft
Loading dock apron$10 – $20 / sq ft
ADA-compliant sidewalk installation$8 – $15 / sq ft
Commercial foundation / grade beam$12 – $22 / sq ft
Concrete curbing installation$18 – $30 / linear ft
Expansion joint sealing (polyurea)$3 – $8 / linear ft
Slab leveling (polyurethane foam)$5 – $25 / sq ft
Crack repair (epoxy injection)$500 – $5,000+
Concrete resurfacing overlay$4 – $10 / sq ft

Market price ranges only — not quotes. Every Jacksonville commercial project is site-specific.

Commercial concrete cost assessment — Jacksonville FL commercial slab project
⚠ Important Note Phone quotes for commercial concrete are rarely accurate. Slab thickness, rebar specification, subbase prep, drainage design, and permit costs all affect the final number significantly. We provide written, itemized estimates after an on-site visit — free.

Factors That Affect Commercial Concrete Pricing in Jacksonville

Slab Thickness4-inch standard flatwork vs. 6–8 inch industrial spec changes material costs significantly.

Subbase PreparationSandy subgrade in Duval County often requires additional compaction or base material.

Reinforcement SpecRebar gauge and spacing, wire mesh vs. fiber reinforcement — all load-specific.

Concrete Mix (PSI)3,000 PSI standard flatwork vs. 5,000+ PSI for heavy industrial applications.

Surface FinishBroom finish standard. Exposed aggregate, polished, or epoxy-coated surfaces add cost.

Permit & EngineeringStructural permits and engineering review for foundations and tilt-up work are separate line items.

Service Areas

Commercial Concrete Services Across Northeast Florida

We serve Jacksonville and surrounding counties for commercial concrete work. Most projects are within Duval County, but we regularly work across St. Johns, Clay, and Nassau counties as well.

Duval County

Primary service area. All commercial services available.

St. Johns County

Ponte Vedra, Nocatee, St. Augustine — regular coverage.

Clay County

Orange Park, Fleming Island, Middleburg area projects.

Nassau County

Fernandina Beach, Yulee — available for commercial work.

Southside

Commercial corridor, warehouses, retail

Deerwood

Office parks, commercial plazas

Baymeadows

Industrial parks, light commercial

Mandarin

Mixed-use, retail, residential conversion

Arlington

Industrial zones, commercial flatwork

Jacksonville Beach

Coastal commercial, hospitality concrete

Riverside

Mixed-use, renovation, historic areas

Springfield

Urban infill, mixed commercial

San Marco

Retail, restaurant, commercial patios

Avondale

Small commercial, specialty concrete

Orange Park

Retail, warehouses, parking lots

Nocatee

New commercial construction, slabs

Ponte Vedra

High-end commercial, decorative work

Fleming Island

Commercial pads, foundations

Fernandina Beach

Nassau County commercial projects

Yulee

Industrial, warehouse, logistics

Not sure if we cover your area? Call us — if your project is within reasonable range, we'll make it work. We don't turn away commercial work based on county lines.

📞 (904) 590-1120
FAQ

Questions About Commercial Concrete in Jacksonville

Direct answers to the questions Jacksonville business owners ask us most. No runaround — just the information you need to make the right decision.

Ask Us a Question →
How much does commercial concrete cost in Jacksonville, FL?
Commercial concrete in Jacksonville typically ranges from $7 to $18 per square foot depending on project type. Standard flatwork runs $7–$14, warehouse and industrial floors $9–$18, and loading dock aprons $10–$20 per square foot. Site prep, slab thickness, reinforcement spec, and permit costs all affect the final price. Always request a written, itemized estimate after an on-site visit — not a phone quote.
Do you handle Duval County permits for commercial projects?
Yes. We coordinate City of Jacksonville and Duval County permit requirements as part of the project. Structural permits, right-of-way permits for work near public roads, and engineering review coordination for foundation and tilt-up work are all handled on our end. You shouldn't have to navigate commercial building permits yourself.
How long does a commercial concrete project take?
Timelines vary by scope. A standard parking lot resurfacing or small slab installation can be completed in 1 to 3 days. Larger warehouse floors or foundation work may run 1 to 3 weeks depending on pour size, cure schedule, and inspection requirements. We provide a written timeline before work begins and update you on any changes before they happen.
What PSI concrete do you use for commercial floors?
Standard commercial flatwork typically uses 4,000 PSI mix. Forklift-rated warehouse floors and heavy industrial applications often specify 5,000 PSI or higher depending on load requirements. Parking lots may use 4,000 PSI with air entrainment. We match the concrete specification to the actual load and use requirements of each project — not a one-size-fits-all approach.
How does Jacksonville's sandy soil affect commercial slabs?
Sandy subgrade shifts under load more than clay-based soils, and Jacksonville's water table variability creates additional subbase instability. Without proper compaction, adequate gravel base depth, and correct drainage slope, commercial slabs in Duval County can develop settlement cracks and voids within a few years. Experienced local contractors factor these conditions into every specification from the start.
Can you repair a commercial slab instead of replacing it?
Often, yes. Repair works when the subbase is still structurally sound and damage is limited to surface cracking, spalling, joint failure, or minor settling. Polyurethane foam injection can stabilize voids without slab removal. Full replacement is needed when the subbase has failed significantly. We always assess subbase integrity before making any repair vs. replacement recommendation.
Do you offer free estimates for commercial concrete?
Yes. We provide free on-site assessments and written, itemized estimates at no charge. We don't give phone or ballpark quotes for commercial work — the accuracy isn't there without seeing the site. Request a free estimate through our contact form or call (904) 590-1120 directly.
Are you licensed and insured for commercial concrete in Florida?
Yes. Every contractor on our crews holds a valid Florida DBPR license. We carry full general liability insurance and workers compensation coverage. Insurance certificates are provided before work begins on every project. You can verify any Florida contractor license directly through the Florida DBPR portal at myfloridalicense.com — we encourage every customer to check.
Ready to Start

Ready to Start Your
Jacksonville Concrete Project?

Tell us about your project. We'll schedule a free on-site visit, assess the site honestly, and deliver a written, itemized estimate you approve before any work begins — no pressure, no runaround.

Florida DBPR Licensed Fully Insured Free On-Site Estimate Written Quote Only No Hidden Fees Duval County Permits Handled